bran_finisher.jpg bucket_elevator.jpg de-stoner_cum_classifier.jpg double_aspirator.jpg drum_detacher.jpg drum_sieve.jpg indent_cylinder.jpg mega_separator.jpg paddy_master.jpg

pages

Mega Separator

Key Features

  1. High efficiency and high throughput due to rotary and linear motion
  2. No jerk on bearing, quiet and vibration free operation due to absolutely balanced drive ensures enhanced mega separator
    life.
  3. Latest technology ensures high speed operation up to 500rpm.
  4. Much lower power consumption compared to other similar machines.
  5. Six different impurities taken out from the grain flow.
  6. Unique design to accommodate Magnetic Separator for removal of Iron pieces both at tail end and inlet of the machine (optional).
  7. No moving part except two bearings make the main machine tray almost maintenance free.
  8. Four different principles of separation employed for near total cleaning.
  9. No more dust near the machine for operator health and hygine as all the sieves and chamber are fully covered.
  10. Newely developed cyclochamber ensures very little escape of dust particles to the fan. Thus almost eliminating the use of cyclone in the system.
  11. Unintegrated fandesign ensures:
  • Possibility of putting the fan after cyclone for more fan life & less maintenance.
  • Use of sme fan for the aspiration of feed elevator shooting hopper and de-husker thus reducing capital cost and power consumption.

Technical Specifications

Type VMS (Pre Cleaner-2 1/2 Deck) VMS (Fine Cleaner - 3 Deck) VMS (Fine Cleaner-3 1/2 Deck)
Model No. 1000(P) 1500 (P) 2000 (P) 1000F 1500F 2000F 1000(FS) 1500 (FS) 2000 (FS)
Capacity (Kg/hr)* 16000 24000 35000 2500-3000 3500-4000 4250-4750 2500-3000 3500-4000 4250-4750
Screnn width (mm) 1000 1250 1500 1000 1250 1500 1000 1250 1500
Sceen Area (Sq.M) 4.2 5.81 6.94 5.04 6.97 8.33 5.88 8.13 9.72
Moto Aspiration Fan (KW) 2.2 3.7 5.5 2.2 3.7 5.5 2.2 3.7 5.5
Motor Sieve Tray (KW) 0.75 1.1 1.1 0.75 1.1 1.1 0.75 1.1 1.1
Motor Feed roll/ Leafage discharge (KW) 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37
Air Volume (Cu.M/hr) 3100 4200 5500 3100 4200 5500 3100 4200 5500
Cyclone/Airlock(not in scope) Size (mm) 800 850 980 800 850 980 800 850 980
Net Weight App. (Kg.) 1620 1920 2210 1700 2010 2320 1810 2140 2460
No. of rubber balls per machine 360 500 600 450 625 750 525 730 875
No.of rubber balls per machine 360 500 600 450 625 750 525 730 875
Lenght of machine (Feed end to Aspirator end) (mm) 2370 2560 2560 2370 2560 2560 2370 2560 2560
Width of machine (mm) 1660 2820 2820 2670 2835 2845 2710 2855 2870
Height of machine (mm) 2660 2820 2820 2670 2835 2845 2710 2855 2870

* Capacities indicated are on wheat. Capacities on other cereals depend upon their type and physical characteristics and can be provided on request.

Specification & design are subject to change without notice.

Vashist Whitener

Applications

The VASHIST WHITENER Type VW is the latest in the rice milling technology. It replaces the conventional cone polisher to provide more efficient and reliable polishing by abrasion.

Function

The VASHIST WHITENER Type VW emplys the principle of vertical abrasion. brown rice is fed at the top end ofvashist whitener
the machine, which is pushed by a feed screw to the whitening chamber, whre it is worked by a set of rotating wheels against an outer perforated sheet cover. A set of metallic brake along with the counter weight of the rice outlet controls the degree and efficiency of whitening process.

Key Features

  1. Easy access to the machine interior
  2. Easy operation and maintenance
  3. Flow of air cools the rice, hence low breakage.
  4. Uniform & gentle operation

Optional Additions

  • Magnetic Separator
  • Auto cut off feed when the outer hopper is choked.

Technical Specifications

Type Length (mm) Width (mm) Height (mm) Motor (KW) Capacity (TPH) Air (m3/m)
VW-4000 1650 850 1900 40-50 3.5 - 4.5 40

Flour Mill Machinery

 

Rice Mill Machinery

 

Bran Finishers (Type VBF)

Applications

The VBF type Bran finishers are designed to separate the last remaining endosperm adhering to the bran to ensure maximum flour extraction without causing excessive bran contamination.

Operation

The stock enters the machine tangentially, at the inlet. the stocks are thrown against an impact wall and bran finisher type

perforated screen by internal crimped beaters rotating inside. The continous impact caused by these beaters separates the last remaining endosperm from the bran particles while the bran itself is not excessively damaged. The released endosperm then passes through the perforated screen jacket, to be collected for further processing and the cleaned bran comes out of the tail end of the the machine.

Key Features

  • Increased extraction - recovery of valuable endosperm.
  • High capacity - with efficient endosperm recovery.
  • Low power and space requirments.
  • Robust, long-lasting, hygienic construction.

Technical Specifications

Type Length (mm) Width (mm) Height (mm) Capacity (KG/hr.) Power Requirenment (H.P.)
VBF-3 1370 630 1175 350-650 3-5

Drum Detacher (Type VDD)

Applications

Detacher is a machine for breaking of the flaked fragments of the grind of the smooth roll passage in a flour mill. Its application will increase the efficiency of the sieving machine. It also helps reducing the load on the subsequent roller mills.drum detacher type

Construction

A simply supported rotor having a beater and conveying blades is enclosed in a drum encloser. The stock enters at the top end and leaves the machine from the bottom end.

Operation

The grind of the smooth roll enters through the inlet hopper. It is thrashed against the walls several times by the action of beaters before reaching the discharge spout. Thus all the flakes present in the incoming stock get fragmented and dislodged.

Technical Specifications

Type Length (mm) Width (mm) Height (mm) Motors (H.P) Capacity TPH
VDD-50 605 355 410 1.5-3 0.5-1.5
  1. Drum Sieve
  2. Vibro Seperator Type VTRA
  3. Scouring Machine Type: VSC
  4. Pulse Jet Filter Type VJF

Our Products

JSN Dome is designed by JoomlaShine.com